Pinnacle 100 - LTE-M/NB-IoT & Bluetooth 5.0 multi-band module, M.2 connector
Extremely power conscious, the Pinnacle 100 is ideal for battery-powered devices operating at the edge of your IoT networks, seamlessly bridging the cellular WAN to the Bluetooth PAN. It’s never been easier to bridge wireless Bluetooth 5 sensor data to cloud services like AWS IoT over a low-power LTE connection.
- LTE-M / NB-IoT radio via Sierra HL7800 (Altair ALT1250) – LTE bands 1, 2, 3, 4, 5, 8, 12, 13, 20, 28
- MCU / Bluetooth 5 radio via Nordic nRF52840 – BT v5, Coded PHY (Long range), 2MPHY, BLE Mesh
- Cortex-M4F – 32-bit @64 MHz, 256 KB of RAM, 1 MB internal flash, 8MB QSPI
- Antenna Options –Unique low-cost, pre-integrated antenna variant plus external variant with u.FL connectors
- Industrial Temp Range – Operating range -40° to +85° C
- Globally & Carrier Certified –FCC, IC CE, BT SIG plus PTCRB, GCF and End Device certified - AT&T, Verizon, Vodafone (all pending)
- Flexible Programming – Design your way Hostless mode via Zephyr RTOS or Hosted mode AT Command Set
- Secure Firmware Upgrade – Comes pre-programmed with Laird’s secure bootloader
The Pinnacle™ 100 modem seamlessly incorporates a powerful Cortex M4F controller, full Bluetooth v5 and LTE-M/NB-IoT capabilities – all with full regulatory certifications and LTE carrier approvals.
Develop your application directly on the M4F controller using Zephyr RTOS to cut BOM costs and power consumption. Take advantage of the Zephyr community, Laird’s sample code (cellular, Bluetooth) and hardware interfaces, or use our hosted mode AT commands set.
Pinnacle 100™ Modem – LTE-M/NB-IoT and Bluetooth – Integrated AntennaPinnacle 100-EA
Pinnacle 100™ Modem – LTE-M/NB-IoT and Bluetooth – External AntennaPinnacle 100-DVK-IA
DVK – Pinnacle 100™ LTE-M/NB-IoT and Bluetooth – Integrated AntennaPinnacle 100-DVK-EA
DVK – Pinnacle 100™ LTE-M/NB-IoT and Bluetooth – External Antenna