AMC-232USB01R: RS232 to USB Convertor

The AMC-232USB01R has been replaced by the FTDI UT232R for new orders. Drivers and product information are still available under the 'Resources' tab on this page.

Read More

BRBLU03-010A0: High Speed Bluetooth USB Adapter

The Laird BRBLU03-010A0 Bluetooth USB adapter is designed specifically to deliver the high data rates required by modern technology.

Read More

C232HD: USB 2.0 Hi Speed to UART Cables

The C232HD USB 2.0 Hi-Speed to UART cable incorporates FTDI's FT232H USB to UART interface IC device which handles all the USB signalling and protocols.

Read More

C232HM: USB 2.0 Hi Speed to MPSSE Cables

The USB-MPSSE cable is capable of providing a USB to SPI, I2C or JTAG interface.  This is accomplished by the MPSSE within the FT232H device which has the ability to emulate synchronous serial protocols while handling all the USB signalling and protocols.

Read More

Chipi-X10: USB2.0 to DB9 RS-232 full handshake UART cable

The Chipi-X10 is a USB2.0 to RS-232 DB9 (male) cable with full handshake UART functionality.

Read More

DB9-USB: Serial to USB Modules

The FTDI range of DB9-USB serial to USB modules provide a simple and fast method of migrating existing DB9 based RS232 connector interfaces to USB 2.0, without the need for any board re-design.

The modules feature a USB 2.0 mini-B connector on a module which fits a standard 9-pin DB9 connector footprint.

Read More

FT120: Full speed USB device controller with parallel bus IC

The FT120 is a USB full speed device controller, designed to communicate with a micro-controller over the generic parallel interface. The FT120T (28 pin TSSOP package) can be used in designs currently using the legacy PDIUSBD12 device.

Read More

FT121: Full speed USB device controller

The FTDI FT121 provides a cost and feature optimized USB full-speed device controller. The FT121 provides an SPI slave interface to the host processor and has internal clocking allowing for space optimised designs.

Read More