The EVK‑NINA‑B1 is designed for use with Arm® Mbed™ and is a
complete starter kit that allows quick prototyping of a variety of
Bluetooth low energy sensor applications for Internet of
Things.
The EVK‑NINA‑B1 evaluation kit includes an evaluation board, which
can be used as a reference design for the NINA‑B1
series Bluetooth Low Energy modules. For use cases requiring
NFC, the included NFC antenna can be used.
Additional hardware interfaces such as SPI, I2C, UART, ADC, and
GPIOs are available using Arm Mbed. The EVK‑NINA‑B1 can also be
used to evaluate the pre‑loaded u‑blox NINA‑B1 Connectivity
Software using the s‑center tool on a PC.
Features:
- Available in two variants - EVK‑NINA‑B111 and
EVK‑NINA‑B112
- All the NINA‑B1 module pins are available at
connectors
- Can be powered through USB, external power supply, or coin cell
battery
- Has an onboard debugger hardware and firmware
Kit includes:
- EVK-NINA‑B1 evaluation board
- NFC antenna
- External antenna with U.FL connector (EVK‑NINA‑B111 only)
- USB cable
- Quick Start card
For sales and technical development support from our in-house
engineering team, please contact the Alpha Micro
team.

Click here for the u-blox Short Range
Radio modules linecard.
Part No. |
Description |
Pack Size |
EVK-NINA-B111 |
Evaluation kit for NINA-B111 module with antenna pin |
Each |
EVK-NINA-B112 |
Evaluation kit for NINA-B112 module with on-board antenna |
Each |
NINA-B1
Modules |
NINA-B111
|
u-blox NINA-B111 module, BLE v4.2 (Bluetooth 5 Ready), antenna
pin, MSL 4
|
Reel of 500 |
NINA-B112 |
u-blox NINA-B112 module, BLE v4.2 (Bluetooth 5 Ready), on-board
antenna, MSL 4 |
Reel of 500 |
* Modules are shipped with the u-blox connectivity software and
can be re-flashed with customer application (OpenCPU).