F143-MINI-2-GEVK - Miniature development and evaluation kit for the AX8052F143 ultra-low power RF-Microcontroller

Fully-featured development kit for the AX8052F143, with minature modules (868MHz), debug adapter and all software necessary to achieve short development times.

The F143-MINI-2-GEVK is a miniaturized development kit for the designer starting out with the AX8052F143, ON Semi's ultra-low power high performance SoC RF Micro-controller. The F143-MINI-2-GEVK hardware consists of a USB debug adapter and a pair of RF modules (F143-MINI-A-MOD-GEVB and F143-MINI-B-MOD-GEVB modules) and includes all software necessary to develop systems in the shortest possible time. The modules have a tiny footprint of just 33 x 15 mm2. One module comes with a chip antenna, the other is equipped with an SMA connector.

The F143-MINI-A-MOD-GEVB module is equipped with an SMA connector that may be used either to connect a 50 W whip antenna or measurement equipment. This module does not allow for batteries to be connected but can be powered via the debug adapter. The F143-MINI-B-MOD-GEVB module is equipped with two 1.5 V LR44 batteries and a chip antenna. It can be powered either by the batteries or the debug adapter. The PCB section containing the battery clips can be broken away if not used, resulting in a module equal in size to the F143-MINI-A-MOD-GEVB. Modules are designed for use at a carrier frequency of 868.3 MHz.

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

Part No. Description Pack Size
F143-MINI-2-GEVK

The F143-MINI-2-GEVK contains:

  • F143-MINI-A-MOD-GEVB module (868MHz)
  • F143-MINI-B-MOD-GEVB module (868MHz)
  • USB debug adapter
  • Whip antenna
  • Debug cable
  • USB cable
  • Batteries

ยน Contents are subject to change at ON Semiconductor's discretion

Each
F143-MINI-A-MOD-GEVB

The F143-Mini-A-MOD module is equipped with an SMA connector that may be used either to connect a 50Ohmwhip antenna or measurement equipment. This module does not allow for batteries to be connected but can be powered via the debug adapter. Modules are designed for use at a carrier frequency of 868.3 MHz.

Note: If purchasing this board without the F143-MINI-2-GEVK kit, the AXDBG Debug Adapter much also be purchased for programming.

Each
F143-MINI-B-MOD-GEVB

The F143-Mini-B-MOD module is equipped with two 1.5 V LR44 batteries and a chip antenna. It can be powered either by the batteries or the debug adapter. The PCB section containing the battery clips can be broken away if not used, resulting in a module equal in size to the F143-Mini-A-MOD. Modules are designed for use at a carrier frequency of 868.3 MHz

Note: If purchasing this board without the F143-MINI-2-GEVK kit, the AXDBG Debug Adapter much also be purchased for programming.

Each

Related Products

Recently Viewed Products

Last updated: 3 January 2018