xPico 110 - SMT serial to Ethernet device server module

The compact Lantronix xPico® 110 SMT module makes it easy for OEM's to network-enable their industrial machines.

The Lantronix xPico 110 enables connection to virtually any 8/16/32-bit microcontroller with a UART interface. Simplify your Application firmware with a completely off-loaded hardened TCP/IP network stack, robust connectivity software and flexible configuration interfaces without writing a single line of code.

xPico 110 offers secure communication of device data with one or more applications on the local network or across the Internet. In addition, customer proven TruPort® Serial technology supports reliable and transparent pass-through of hundreds of standard fieldbus protocols such as Modbus as well as proprietary serial protocols.

Engineers can integrate PoE or utilize different Ethernet connector types in their designs. An on-module PHY and an extended operating temperature range simplifies design integration in the harshest environments.

Key features:

  • Hardened and completely offloaded TCP/IP stack and network services
  • TruPort® Serial technology for robust and secure data communication
  • Fine-grained security policy configuration
  • Integrated web server
  • NIST certified 256-bit AES encryption
  • Integrated on-module 10/100 Mbps PHY
  • Available Modbus gateway variant
  • Compact SMT footprint (18mm x 31mm)
  • Industrial operating temperature range (-40°C to + 85°C)

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

Data Communication

  • TruPort® Serial Technology- TCP and UDP Server Mode, TCP and UDP Client Mode, Multi-host Connect; AES Encrypted Sessions
  • SMTP Alerts-GPIO Triggers; Serial Data Stream Triggers

Security and Authentication

  • NIST Certified AES (FIPS-197) Algorithm
  • 256-bit, 192-bit, 128-bit AES encryption
  • Configuration Password (Telnet, Serial)
  • Software Controlled Network Service Port Enable/Disable

Management Interfaces

  • Serial Port, Telnet, Internal Web Server (HTTP), SNMP
  • Microsoft Windows-based utility for web configuration
  • Lantronix Device Discovery Protocol
  • Firmware upgrade via TFTP and Serial Port

Protocol Support

  • DHCP Client, BOOTP, TFTP
  • Telnet Server, HTTP server
  • IPv4, TCP/IP, UDP/IP, ARP, ICMP, Auto-IP, DNS, SNMP v1

Ethernet Specifications

  • IEEE 802.3 MAC and PHY, 10BaseT and 100BaseT
  • Auto Negotiation; Full duplex and half duplex support

Serial Specifications

  • 2x UART (Serial) Ports
  • CMOS (Asynchronous) 3.3V Level Signals (5V Tolerant)
  • Data Rates: 300 bps to 921 kbps (software selectable)
  • Data Bits: 7 or 8; Stop Bits: 1 or 2; Parity: Odd, Even or None
  • Control signals: DTR/DCD, RTS/CTS (Serial Port 1 only)
  • Flow Control: XON/XOFF (software), RTS/CTS (hardware), None

Other Interfaces

  • Programmable I/O: 16 PIO pins (software selectable)


  • CPU: 16-bit x86 DSTni-EX up to 120 MHz
  • Memory: 256 KB SRAM, 512 KB Flash
  • 384 KB for Web Pages


  • Input Voltage: 3.3 VDC
  • Current Consumption: 240 mA typical (100 BaseT; 120MHz CPU)


  • 18.3 mm (W) x 31.1 mm (L) x 3.0 mm (H)


  • Tape & Reel: 250 units/reel
  • Sample Pack: 10 units/pack


  • Operating Temp: -40°C to +85°C
  • Storage Temp: -40°C to +85°C
  • Relative Humidity: 10% to 90% non-condensing



  • EN55032:2010 Class B; CFR Title 47, Part 15, Subpart B, Class


  • EN 55024:2010; EN 61000-3, EN 61000-4


  • UL 60950-1, 2nd Ed; CSA C22.2 No. 60950-1-07, 1st Ed
  • IEC 60950-1:2005, 2nd Ed; EN 60950:2006


  • 5 Year Limited
  • Access Control & Physical Security
  • Industrial Machines
  • Renewable Energy
  • Building Automation
Part No. Description Pack Size
XPC100200B-01 Wired device server module, AES (bulk) Reel of 250
XPC100200S-01 Wired device server module, AES (sample) Packs of 10 modules
XPC10020MB-01 Wired device server module, Modbus (bulk) Reel of 250
XPC100200K-02 Evaluation kit for xPico 110 module (includes module) Each

Related Products

Recently Viewed Products

Last updated: 21 May 2018