UDS1100 / UDS1100-PoE - Single Port Ethernet External Device Servers

With the UDS1100, virtually any piece of equipment can be added to an Ethernet network in a matter of minutes. This single-port external device server is a quick, simple and inexpensive way to bring the advantages of remote management to equipment not currently connected to a network.

Available to buy now from our Webshop

Device networking is what powers M2M (machine to machine) communication. The UDS family of external device servers enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet.

With the UDS1100, virtually any piece of equipment can be added to an Ethernet network in a matter of minutes! This single-port external device server is a quick, simple and inexpensive way to bring the advantages of remote management to equipment not currently connected to a network.

And with the UL 864 listing, fire and alarm panel equipment manufactures can easily add networking capabilities to their existing UL 864-listed products without the need to reapply to UL.

Lantronix' approach to network-enabling devices is transparent to your attached equipment and software so you won't need to change the way you work. Using a method called serial tunneling, the UDS1100 encapsulates serial data into packets and transports it over Ethernet. Serial tunneling can be done in two ways:

  • Using Lantronix supplied Com Port Redirector™ software, Windows® device applications not designed for network communications are re-directed to communicate to devices connected to the UDS1100.
  • Connecting two UDS1100 device servers configured to automatically talk to each other over the network creates virtual serial to Ethernet connections that can extend serial communications across a facility or around the world.

The built-in web server enables users to access and configure the UDS1100 from a standard web browser.

Web pages enabling the UDS1100 to be customized for unique applications can be built using Lantronix development tools. On-board Flash memory provides room for future system software upgrades and maintenance-free, non-volatile web page storage.

In modem emulation mode, the UDS is used to replace dial-up modems. The unit accepts modem AT commands on the serial port. It then establishes a network connection to the end device, leveraging network connections and bandwidth to eliminate dedicated modems and phone lines. The PoE version enables you to also take advantage of network connectivity in areas without power outlets.

Built into the included Com Port Redirector software, TruPort® technology enables Windows-based applications to access and control serial ports on the UDS1100 as if they were actually local PC serial ports. The application can monitor and set hardware pins on the UDS1100 serial ports as well as access serial buffers for total Com port control. This allows existing applications to seamlessly transition from controlling local devices to true remote monitoring and control of devices around the world.

Key Features:

  • Network virtually any device in minutes
  • Access, monitor and control equipment over Ethernet
  • Replace dedicated PCs and/or modem lines with fast and reliable Ethernet networking
  • Configure quickly and easily via HTTP, DHCP, Telnet, serial or Lantronix DeviceInstaller™ utility
  • Supports RS232, RS422 and RS485 communications
  • Environmentally-friendly RoHS and WEEE compliant
  • Small enough to place almost anywhere
  • Features TruPort® Com port control technology (also see UDS2100)
  • Power over Ethernet (PoE) model available
  • Meets the newest UL 864 9th Edition standards

UDS-1100 device servers are also available in un-housed PCB format for embedding within machines, as the UDS-1100B. For OEMs and system integrators they offer easy-to-implement solutions across almost any network, providing distributed intelligence to

thousands of devices.

Lantronix IDS1100-B Serial to Ethernet module

The Modules eliminate the need to invest engineering resources to develop similar networking solutions and reduce the time it takes to bring intelligent devices to market. Additionally, UDS board products can be a cost-effective alternative to dedicated PCs or lengthy serial cables with fast and reliable networking technology, and bring several new features and enhancements to the embedded product line.


Have you considered NetPort II?

For certain specific applications where custom features are required such as RS232 only, smaller size or weight, power-sharing the PSU, bespoke cable adaptors and specialized firmware or re-branding we can offer the NetPort device server.

Based on the XPort device server it behaves almost identically to the UDS family, with the same config menu's, tools and utilities so you can migrate your accumulated knowledge straight over to NetPort with confidence. For more info click here...

Can't quite find what you are looking for?
Why not contact the Alpha Micro team for your area?

Serial Interface

  • Interface: Software-selectable RS232, RS422 or RS485 (2 and 4 wire support)
  • Connectors: 1 DB25F DCE serial port
  • Data Rates: Software-selectable baud rate from 300 to 230 KBaud

Serial Line Format

  • Characters: 7 or 8 data bits
  • Parity: odd, even, none
  • Stop Bits: 1 or 2 Control

Flow Control

  • Signals: CTS/RTS (Hardware)
  • Flow Control: XON/XOFF (Software)

Network Interface

  • Interface: 10Base-T/100Base-TX Ethernet port
  • Software selectable Ethernet speed 10/100/Auto
  • Software selectable Half/Full/Auto duplex
  • Connectors: RJ45
  • Standards: ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP, and Telnet, TFTP

Indicators (LED)

  • Power, 10/100 Link/Activity (green)
  • 100/100 Link/Activity (green)
  • Diagnostics (red)
  • Status (green)

Processor

  • CPU: Lantronix DSTNI-EX 48 MHz clock
  • Memory: 256 KB zero wait state SRAM, 2 MB Flash

Management

  • Lantronix DeviceInstaller GUI, Serial login, SNMP, Telnet login, HTTP

Power

  • UDS1100:
    • 9-30 VDC or 9-24 VAC on barrel connector (1.5 Watts maximum consumption)
    • 9-30 VDC on DB25F serial interface
  • UDS2100:
    • Powered over Ethernet via 802.3AF compliant power source

Environmental

  • Operating: 0° to 60° C (32° to 140°F)
  • Storage: -40° to 85° C (-40° to 185° F)

Agency Approvals

  • UL, CSA, FCC, CE, TUV, CTick, VCC, UL 864

Included Software

  • Windows® 98/ME/NT/2000/XP-based DeviceInstaller configuration software, Com Port Redirector™ software and related utilities

Packaging

  • Material: Metal enclosure with integrated wall mounts; optional 35 mm DIN-rail mount available
  • Dimensions (LxWxH): 9.0 x 6.4 x 2.3 cm (3.5 x 2.5 x 0.9 in)
  • Weight: 0.20 kg (0.45 lb)
  • IP Rating: 30

Shipping Dimensions

  • Dimensions (LxWxH): 35.5 x 17.1 x 7.6 cm (14 x 6.75 x 3 in)
  • Weight: 1.5 kg (3.0 lbs)

Emissions

FCC Part 15 Subpart B Class A Radiated Emissions 30MHz - 1000MHz
ICES-003 Issue 4 February 2004 Class A Radiated Emissions 30MHz - 1000MHz
AS/NZS CISPR 22: 2004 Class A Radiated Emissions 30MHz - 1000MHz
EN55022: 1998 + A1: 2000 + A2: 2003 Class A Radiated Emissions 30MHz - 1000MHz
VCCI V-3/2005.04 Class A Radiated Emissions 30MHz - 1000MHz
EN61000-3-2: 2000 Class A Harmonic Current Emissions
EN61000-3-3: 1995 + A1: 2001 Fluctuations and Flicker

Immunity

EN55024: 1998 +A1: 2001 +A2: 2003
IEC_61000-4-2: 1995 ESD 8kV Air Discharge (Direct), 4kV Contact Discharge (Direct/Indirect)
IEC_61000-4-3: 1995 Radiated Immunity 3.0V/m, 1KHz AM Sine Wave at 80%
IEC_61000-4-4: 1995 EFT/Burst 1.0kV Power Lines, 0.5kV I/O Lines
IEC_61000-4-5: 1995 Surge Immunity 1.0kV Common Mode, 1.0 kV Differential Mode
IEC_61000-4-6: 1996 Conducted Immunity 3.0 Vrms, 80% AM Modulated (1KHz)
IEC_61000-4-8: 1993 Magnetic Field Immunity 50Hz 1.0 Arms/m
IEC_61000-4-11: 1994 Voltage Dips and Interrupts (>95%,0.5 periods), (30%,25 periods), (>95%,250 periods)

Isolation

  • Designed with protection against transients and ESD for use under harsh environments.
  • Serial Port: 15 kV ESD protection on RS232 and RS422/485 transceivers
  • Power Input: Up to non-repeated 600 W 10/100 usec pulse protection against transient over voltages
  • Ethernet Port: 1500 VAC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection
  • Security systems
  • Access control panels
  • Fire alarm systems
  • Time & attendance devices
  • Biometrics
  • Medical equipment
  • Motion controllers
  • Test and measurement
  • Assembly line control
  • RFID and inventory control
  • POS systems

Compare Lantronix external networking devices here.

PART NUMBER Description
UD1100001-01

UDS1100 Single port device server, supplied with US domestic power 120 VAC power supply

UD1100002-01

UDS1100 Single port device server, supplied with 100-240 VAC International power supply with regional adapters

UD11000P0-01

UDS1100-PoE Single port device server. Power Over Ethernet variant (* MOQ 18)

UD110000B-01

UDS1100-B Single port device server board only (uncased version for embedding)

UD1100IA2-01

UDS1100-IAP Single port device server, industrial strength, 
100-240 VAC International power supply with regional adapters, includes 500-163 cable and ACDIN1001-01 Din rail mount

UDS1100 Accessories

500-163-R

DB25M to DB9F serial cable

500-171-R

DB25M to RS485 and 9-30 VDC power input screw terminal adapter

ACDIN1001-01

Optional DIN-rail mount for UDS1100, SDS1101 and UDS1100-IAP

Two Port Variants
UD2100001-01

UDS2100 Two port 10/100 device server, supplied with US domestic power 120 VAC power supply

UD2100002-01

UDS2100 Two port 10/100 device server, supplied with 100-240 VAC International power supply with regional adapters

UDS2100 Accessories
500-163-R DB25M to DB9F serial cable
500-164-R DB9F to DB9F Null modem cable
ACDIN2001-01 Optional DIN-rail mount for UDS2100 and SDS2100

Related Products

Recently Viewed Products

Last updated: 29 August 2017