UMFT311GP - Shield board for UMFT311EV development module

GPIO Board is a shield board for use with the UMFT311EV development module.

PCB with 8 buttons and 8 LEDs which is plugged into a UMFT311EV development board or used as a Vinco shield to test GPIO operation.

Key features:

  • 8 GPIO lines interface.
  • 8 LEDs controlled through the GPIO interface.
  • 8 Push Button Switch to be used as user input which is connected to GPIO interface.
  • Suitable for use with the Vinco development module

* This is not a stand-alone module, it has to be used with the UMFT311EV.

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

  • 8 GPIO lines interface.
  • 8 LEDs controlled through the GPIO interface.
  • 8 Push Button Switch to be used as user input which is connected to GPIO interface.
  • +5V Single Supply Operation.
  • Board supply current: 300mA.
  • Board dimensions: 66.60mm x 55.38mm x 22mm (L x W x H).
  • Extended operating temperature range; -40°C to 85⁰C.
  • Recommended operating temperature is between 0°C and 55°C.
Part Number Description Pack Size
UMFT311GP FT311 GPIO Board Rev 1.0 *
Each
UMFT311EV Development module for FT311D Each
FT311D 32-pin single chip full speed USB Android Host IC, LQFP or QFN Reel or tray

* This is not a stand-alone module, it has to be used with the UMFT311EV.

Related Products

Recently Viewed Products

Last updated: 16 May 2018