UMFT311EV - Module with FT311D platform for development of Android platform USB connections

The FTDI FT311D Development Module utilises the FT311D IC to develop USB accessories connecting to Android platforms via Android Open Accessory mode (typically 3.1 onwards).

Key features:

  • Based on single chip USB Android Host FT311D IC.
  • Entire USB protocol handled on the chip.
  • Any one of the six user selectable interface types:- GPIO, UART, PWM, I2C Master, SPI Master, SPI Slave Interface options selectable via 3 mode select pins.
  • 7 GPIO lines interface option.
  • USB error indicator pin.
  • Basic UART interface with RXD, TXD, RTS, CTS, TX_ACTIVE pins option.
  • 4 PWM channels option.
  • I²C Master interface option.
  • SPI Slave interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options.
  • SPI Master interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options.
  • Suitable for use on any Android platform supporting Android Open Accessory Mode (typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4).
  • Standard USB Host connector to connect with Android USB Slave device.
  • USB 2.0 Full Speed compatible.
  • Reduce development time.
  • Rapid integration into existing systems.
  • Based on single chip USB Android Host FT311D IC.
  • Entire USB protocol handled on the chip.
  • Any one of the six user selectable interface types:- GPIO, UART, PWM, I2C Master, SPI Master, SPI Slave Interface options selectable via 3 mode select pins.
  • 7 GPIO lines interface option.
  • USB error indicator pin.
  • Basic UART interface with RXD, TXD, RTS, CTS, TX_ACTIVE pins option.
  • 4 PWM channels option.
  • I²C Master interface option.
  • SPI Slave interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options.
  • SPI Master interface option supporting modes 0, 1, 2 and 3 with MSB/LSB options.
  • Suitable for use on any Android platform supporting Android Open Accessory Mode (typically 3.1 onwards, however some platforms may port Open Accessory Mode to version 2.3.4).
  • 12MHz external crystal.
  • Standard USB Host connector to connect with Android USB Slave device.
  • +5V Single Supply Operation. USB 2.0 Full Speed compatible.
  • Extended operating temperature range; -40 to +85⁰C.
  • Board dimensions: 68.58mm x 55.38mm x 14.00mm (L x W x H).
  • Reduce development time.
  • Rapid integration into existing systems.
  • Connecting Android phones to USB accessories
  • Connecting Android tablets to USB accessories
  • Controlling instrumentation from Android devices
  • Home automation via Android devices
  • Data logging from USB accessories
  • Connecting printing devices to Android devices

[tidy error]

Part Number Description Pack Size
UMFT311EV Development module for FT311D Each
UMFT311GP FT311 GPIO Board Rev 1.0 Each
FT311D 32-pin single chip full speed USB Android Host IC, LQFP or QFN Reel or tray

[tidy error]

Related Products

Recently Viewed Products

Last updated: 1 September 2013