UMFT260EV1A - Development module for FT260 HID USB to UART IC

The UMFT260EV1A is a development module for FTDI's FT260, HID-class USB to UART/I2C Bridge IC.

FTDI's UMFT260EV1A is a development module for FTDI's FT260, HID-class USB to UART/I²C Bridge IC and is ideal for functionality evaluation and fast development.

The UMFT260EV1A is designed to plug into a standard 0.8" wide 24 pin DIP socket and connects to a host system is via a Micro USB-B connector.

Need advice or more information?

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

  • PCB assembly module is designed to fit a standard 20.32mm (0.8") wide 24 pin DIP socket. Pins are on a 2.54mm (0.1") pitch.
  • An on-board Micro USB-B type connector allows modules to be connected to a host system via a standard USB A to Micro B cable.
  • On-board I²C 2kbits EEPROM (address:0x50) to contain FT260 configuration settings and vendor specific parameters (I²C pull-high circuit is implemented as default)
  • Jumpers for selecting the FT260 HID interfaces configuration
  • Solder jumpers for configuring the FT260Q to be in USB Bus powered or Self powered modes
Development Tools
UMFT260EV1A FT260 development module Each
UMFTPD3A Universal programming module, compatible with FTDI FT260 and FT4222H IC's Each
Part Number Description Pack Size
FT260Q-R FT260Q HID class USB to UART / I2C Master IC, 28-pin WQFN, 5mm x 5mm, MSL 3
Reel of 2500
FT260Q-T FT260Q HID class USB to UART / I2C Master IC, 28-pin WQFN, 5mm x 5mm, MSL 3
Tray of 490
FT260S-R FT260Q HID class USB to UART / I2C Master IC, 28-pin TSSOP, 9.7mm x 6.4mm, MSL 3 Reel of 2500
FT260S-U FT260Q HID class USB to UART / I2C Master IC, 28-pin TSSOP, 9.7mm x 6.4mm, MSL 3 Tube of 50

Related Products

Recently Viewed Products

Last updated: 28 June 2016