UMFT231XC - FT231X Development module with battery charging support

The UMFT231XC is a development module for the FTDI FT231XQ and is used primarily for evaluating the battery charging abilities of the FT231X.

The UMFT231XC  is a Full speed USB to Full Handshake UART + Battery Charger Detection development module based on the FT231XS. It can be used to verify the USB Dedicated Charging Port (DCP) detection capability of the FT2xxX devices as well as provide a USB to UART bridge.

  • Configured with a LTC4053EDD lithium-ion battery charger
  • 3 way 3.5mm screw terminal for connecting a battery to the module
  • Thermal regulation safety feature
  • 10 pin 0.1" female header used for UART signals, 12 pin 0.1" female header for Power and control
  • Status LED's
  • Mini USB-B connector
  • Power MOSFET for suspending power supplied to an external circuit from USB bus when in USB suspend mode
  • Upgrading Legacy Peripherals to USB
  • Utilising USB to add system modularity
  • Incorporate USB interface to enable PC transfers for development system communication
  • Motherboard and system monitoring through USB
  • USB dongle implementations for Software/ Hardware Encryption and Wireless Modules
  • Interfacing MCU/PLD/FPGA based designs to add USB connectivity
  • USB Instrumentation
  • USB Industrial Control
  • USB Digital Camera Interface
  • Capable of detecting dedicated USB charger ports for charging batteries with high current
Part Number Description Pack Size
UMFT231XC-01 USB to UART evaluation module with battery charger support.
Each
FT231XS-R 16-pin SSOP single chip USB to Full Handshake UART IC
Reel of 2000
FT231XS-U 16-pin SSOP single chip USB to Full Handshake UART IC
Tube of 58
FT231XQ-R 16-pin QFN single chip USB to Full Handshake UART IC
Reel of 5000
FT231XQ-T 16-pin QFN single chip USB to Full Handshake UART IC
Tray of 490

Related Products

Recently Viewed Products

Last updated: 6 November 2012