UMFT230XA - Development module based on the FT230XQ IC

Development module for the FTDI FT230X USB to basic UART IC.

The UMFT230XA development module is slightly larger than the UMFT230XB breakout module but offers access to all the FT-230X device pins. The module has a USB Mini-B connector and 0.1" pitch DIP pin for connecting the interface signals.

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

  • Small PCB assembly module designed to fit a standard 7.62mm (0.3") wide 16 pin DIP socket. Pins are on a 2.54mm (0.1") pitch.
  • On board USB "mini-B‟ socket allows module to be connected to a PC or USB host via a standard A to mini-B USB cable.
  • 16 pin DIP socket (0.3" wide and 0.1" pitch) included with the evaluation module package.
  • Functionally configurable using solder links. The default solder links setup enables the module to  function without peripheral wires or application board. Other configurations enable external power supply options and variation of logic reference levels.
Part Number Description Pack Size
UMFT230XA-01 USB to basic UART evaluation module. Pin Length: 5.6mm.
Each
UMFT230XA-02 USB to basic UART evaluation module. Pin Length: 4.6mm. Each
FT230XS-R 16-pin SSOP single chip USB to basic UART IC
Reel of 3000
FT230XS-U 16-pin SSOP single chip USB to basic UART IC
Tube of 100
FT230XQ-R 16-pin QFN single chip USB to basic UART IC
Reel of 5000
FT230XQ-T 16-pin QFN single chip USB to basic UART IC
Tray of 490

Related Products

Recently Viewed Products

Last updated: 16 May 2018