UMFT220XB - Development breakout module for the FT220X IC

Breakout module for the FT220X USB to 4-Bit SPI/FT1248 interface IC.

The UMFT220XB is a breakout board that converts USB2.0 Full-Speed to SPI/FT1248. These modules do not have a USB connector - instead the modules plug directly into the USB host connector and the pads of the PCB makes electrical contact with the electrical contacts of the USB connector.

All serial interfaces operate at +3.3V voltage levels, however all I/Os are 5V tolerant.

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

  • UMFT220XB bridges from USB to a user chosen, parallel bit interface, FTDI's FT1248/SPI. Note: 2 out of the 4 I/0 lines are available for this module.
  • 3.3V power out limited to 50mA and 5V with as safety fuse
Part Number Description Pack Size
UMFT220XB USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA current limit) and fused 5V. Standard option, connector fitted to CN2.
Each
UMFT220XB-NC USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA current limit) and fused 5V. No connector option, no connector is fitted to CN2.
Each
UMFT220XB-WE USB to FT1248 uses 2 FT1248 I/O lines, 3.3V power out (with a 50mA current limit) and fused 5V. Wire ended option, 6" flying leads fitted to CN2.
Each
FT220XS-R 16-pin SSOP single chip USB to 4-Bit SPI/FT1248 IC
Reel of 3000
FT220XS-U 16-pin SSOP single chip USB to 4-Bit SPI/FT1248 IC
Tube of 100
FT220XQ-R 16-pin QFN single chip USB to 4-Bit SPI/FT1248 IC
Reel of 5000
FT220XQ-T 16-pin QFN single chip USB to 4-Bit SPI/FT1248 IC
Tray of 490

Related Products

Recently Viewed Products

Last updated: 16 May 2018