PTM 33x Series - Energy harvesting wireless sensor module

The PTM 330 radio transmitter module from EnOcean enables the implementation of wireless sensors and switches without batteries. Key applications are handheld remote controls or industrial switches.

When an energy pulse is supplied (e.g. by ECO 200 from EnOcean) an RF telegram is transmitted including a unique 32-bit module ID, the polarity of the energy pulse, and the operat-ing status of 4 digital inputs. The RPS telegram content can be configured if other content is needed.

PTM 330 can be connected to ECO 200 via a con-tact spring. There are two meander structures on the PCB which allow usage of a rubber pad to set the level of two digital inputs.

Alternatively PTM 330 can be mounted as an SMD component onto a host PCB. In this case energy supply pins and digital input pins are accessible via contact pads.

• Power supply: ECO200 or equivalent energy pulse
• Antenna:
  
  • Pre-installed whip antenna (PTM330/330C)
  • External 50Ω or whip antenna (PTM332/332C)
• Frequency: 868.3 MHz (PTM33x) / 315.0 MHz (PTM33xC)
• Transmission power: Typ. 2dBm at antenna base
• Data rate / Modulation type: 125 kbps / ASK
• Telegram type: RPS of type 2 (allows interpretation of operating two buttons simultaneously)
• Digital inputs: 4
• Transmission range: Up to 200m free field, up to 30m indoor
• Module dimensions: 26.2 x 21.15 x 3.5 mm
• Operating temperature: -25°C up to +65 °C

• Building Management and Control

• PTM 330 & PTM 332 Datasheet

  Datasheet for the EnOcean PTM 330 and PTM 332 radio transmitter module for switching applications

  Revision: July 2011Date: 24 November 2011Size: 0.12 MB -  1 Page

  Download

• PTM 330 & PTM 332 User Manual

  Detailed information for implementation and operation of the EnOcean PTM 330 and PTM 332 radio transmitter module for switching applications

  Revision: V1.03Date: 22 March 2012Size: 1.03 MB -  23 Pages

  Download

• PTM 330 Additional Resources

  Additional resources for the PTM 330 can be found at the EnOcean website

  View page

• PTM 332 Additional Resources

  Additional resources for the PTM 332 can be found at the EnOcean website

  View page

• PTM 330 & PTM 332 White Paper

  This White Paper describes the overall application of the EnOcean PTM 330 and PTM 332 radio transmitter modules

  Revision: PTM33x_EN05Date: 10 June 2010Size: 0.17 MB -  3 Pages

  Download

• EDK 300 Datasheet

  Datasheet for the EnOcean EDK 300 Dolphin Developer's Kit

  Revision: May 2012Date: 2 May 2012Size: 0.15 MB -  2 Pages

  Download

• EnOcean Knowledge Base

  EnOcean's Knowledge Base provides FAQ's on software, Dolphin modules and RF topics as well as solutions to specific software issues and the latest technical documentation.

  View page

• EnOcean Application Notes

  EnOcean have a wide range of Application Notes covering every aspect of the design process from inspiration to implementation.

  View page

The fastest way into energy harvesting wireless sensor solutions

EDK 300 for 868 MHZ and EDK 300C for 315 MHz provides system developers with a quick and easy overview of the powerful Dolphin platform. In next to no time, you will be able to develop your own energy-autonomous applications for building automation and many other applications.

The developer's kit supports the bidirectional STM 300, TCM 300 and TCM 320 modules, In addition to innovative wireless modules the developer's kit includes an evaluation board for TCM modules and one for STM, a self-powered PTM 200 wireless switch, two EOP 300 programming adapters plus a software CD with DolphinView, DolphinStudio and Keil uVision Trial.

The EDK 310 and EDK 310C further extend EDK 300/EDK 310C for the solar powered radio modules of the STM 3xy product family. EDK 310 focuses development on the solar powered STM 31x (868 MHz), while the EDK 310C does the same for the 315MHz modules. The kit supports configuration and programming of following STM modules: STM 311, STM 312, STM 320, STM 330. A EDK 300 is needed as a basis.