MM930Mini - FT930Q USB micro-controller development module

The MM930Mini Module is a USB micro-controller development module which utilises the FT930Q bridge chip, capable of handling all USB signalling and protocols.

The MM930Mini Module is a USB microcontroller development module in the Bridgetek product range. It utilizes the FT930Q bridge chip which can handle all USB signalling and protocols. It is ideal for development purposes to quickly prove functionality of adding USB to a target design.

Key features:

  • USB 2.0 Hi-Speed compatible.
  • Reduced development time
  • Rapid integration into existing systems
  • USB powered - no external power supply needed
  • Based on the USB Hi-Speed FT930Q device
  • Entire USB protocol handled by D2xx hardware engine
  • USB micro-B connector common on many commercial devices
  • On-board 500mA 3.3V LDO regulator, 12MHz crystal, 32kHz crystal
  • Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
  • One SPI master supports single / dual / quad modes of data transfer. Clock rate is up to 25 MHz
  • One SPI slave support single data transfer with 25MHz clock
  • I2C bus interface can be configured as master or slave, with data transfers up to 3.4Mbps
  • UHCI / OHCI / EHCI host controller compatible
  • One SPI slave support single data transfer with 25MHz clock

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

AlphaMicro_Bridgetek_FT93x_Selector

Part Number Description Pack Size
MM930Mini
USB micro-controller development module with FT930Q IC on board
Each
FT93x IC's View the range of FT93x MCU's here Various

Related Products

Recently Viewed Products

Last updated: 17 July 2017