MM930LITE - FT930Q USB micro-controller development module

The MM930Lite is a development module for Bridgetek's 32-bit high performance FT93x micro-controller family

The MM930Lite is a development module for Bridgetek's 32-bit high performance FT93x Microcontroller family, which is used to develop and demonstrate the functionality of the FT930 Embedded Microcontroller. This module is ideal for applications including home security systems, home automation systems, USB capability products, embedded multimedia application and other industrial control systems.

Key features:

  • USB 2.0 Hi-Speed compatible
  • Reduced development time
  • Rapid integration into existing systems
  • USB powered - no external power supply needed
  • Based on the USB Hi-Speed FT930Q device
  • Entire USB protocol handled by D2xx hardware engine
  • USB micro-B connector common on many commercial devices
  • On-board 500mA 3.3V LDO regulator, 12MHz crystal, 32kHz crystal
  • Asynchronous Serial data transfer rates from 300 baud to 12 Mbaud at TTL levels
  • One SPI master supports single / dual / quad modes of data transfer. Clock rate is up to 25 MHz
  • One SPI slave support single data transfer with 25MHz clock
  • I2C bus interface can be configured as master or slave, with data transfers up to 3.4Mbps
  • UHCI / OHCI / EHCI host controller compatible
  • One SPI slave support single data transfer with 25MHz clock

For sales and technical development support from our in-house engineering team, please contact the Alpha Micro team.

AlphaMicro_Bridgetek_FT93x_Selector

Part Number Description Pack Size
MM930LITE
FT930 module, a FT32, 32-bit microcontroller with 128kB flash memory, 32kB data RAM and 128kB program memory embedded. SD3.0, USB2.0 Device, 8MB Eflash, several interface pin headers and connectors included.
Each
FT93x IC's View the range of FT93x MCU's here Various

Related Products

Recently Viewed Products

Last updated: 17 July 2017