The C232HD USB 2.0 Hi-Speed to UART cable incorporates FTDI's FT232H USB to UART interface IC device which handles all the USB signalling and protocols.
Read More
The USB-MPSSE cable is capable of providing a USB to SPI, I2C or JTAG interface. This is accomplished by the MPSSE within the FT232H device which has the ability to emulate synchronous serial protocols while handling all the USB signalling and protocols.
The Chipi-X10 is a USB2.0 to RS-232 DB9 (male) cable with full handshake UART functionality.
The FTDI range of DB9-USB serial to USB modules provide a simple and fast method of migrating existing DB9 based RS232 connector interfaces to USB 2.0, without the need for any board re-design.
The modules feature a USB 2.0 mini-B connector on a module which fits a standard 9-pin DB9 connector footprint.
This USB2.0 Full Speed IC offers a compact bridge to I²C devices. The chip is an I²C slave, capable of operating up to 3.4MBit/s, with low power consumption (8mA).
This USB2.0 Full Speed IC offers a compact bridge to I²C devices. The chip is an I²C slave, capable of operating up to 3.4MBit/s, with low power consumption (8mA), with 6 configurable CBUS I/O pins.
This USB2.0 Full Speed IC offers a compact bridge to 4-Bit SPI/FT1248 interfaces, with low power consumption (8mA), and includes the complete FT-X series feature set enabling USB to be added into a system design quickly and easily over an FT1248 interface.
This USB2.0 Full Speed IC offers a compact bridge to 8-Bit SPI/FT1248 interfaces, with low power consumption (8mA), and includes the complete FT-X series feature set enabling USB to be added into a system design quickly and easily over an FT1248 interface.
