Single channel hi-speed USB to UART/FIFO Interface IC for next generation peripheral design with a flexible serial interface or parallel FIFO interface.
Vinculum-II is the 2nd generation of the FTDI Vinculum family of USB host/slave controller devices.
Specialists in converting legacy peripherals to Universal Serial Bus (USB).
FTDI offer the easiest route to USB migration by combining USB-Serial (USB-RS232) and USB-FIFO silicon solutions with their ready-to-go royalty free USB drivers.
FTDI's range of IC devices and "total" solutions products, offer reduced development and debug costs and a fast time to market.
www.ftdichip.com
The C232HD USB 2.0 Hi-Speed to UART cable incorporates FTDI's FT232H USB to UART interface IC device which handles all the USB signalling and protocols.
Read More
The USB-MPSSE cable is capable of providing a USB to SPI, I2C or JTAG interface. This is accomplished by the MPSSE within the FT232H device which has the ability to emulate synchronous serial protocols while handling all the USB signalling and protocols.
The FTDI range of DB9-USB serial to USB modules provide a simple and fast method of migrating existing DB9 based RS232 connector interfaces to USB 2.0, without the need for any board re-design.
The modules feature a USB 2.0 mini-B connector on a module which fits a standard 9-pin DB9 connector footprint.
The FT2232 is the 3rd generation of FTDI's popular USB UART/FIFO family. This device features two Multi-Purpose UART/FIFO controllers which can be configured individually in several different modes.
The FT2232H is FTDI's 5th generation of USB devices and is a USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.
FTDI's popular USB UART devices which enables USB to serial conversion without the hassle.
Single Channel Hi-Speed USB to UART/FIFO Interface IC for Next Generation Peripheral Design.
Bundled with FTDI's well established and proven USB device drivers, this solution enables engineers to easily add Hi-Speed USB connectivity into new and legacy peripheral designs with a minimum of design and support effort.
The FTDI FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available.
