| UDS-10B and UDS100B Embedded Device Servers |
 |
P H A S E O U T
THIS ITEM IS NO LONGER SUPPORTED AND HAS NOW BEEN SUPERCEDED BY USD1100B
Contact our sales team on +44 1256 851770 for information and availability.
The UDS-10B and UDS100B can network-enable virtually any electronic device at board level, allowing it to be remotely monitored, managed, and controlled over the internet or shared network. These boards are designed to be integrated into the housing of devices like factory automation, security & access control, heating and ventilation systems, lighting controller and Point-of-Sale devices. These modules are the internal elements of the UDS10 & UDS100 units and for OEMs and system integrators they offer easy-to-implement solutions across almost any network, providing distributed intelligence to thousands of devices.The Modules eliminate the need to invest engineering resources to develop similar networking solutions and reduce the time it takes to bring intelligent devices to market.Additionally, UDS board products can be a cost-effective alternative to dedicated PCs or lengthy serial cables with fast and reliable networking technology, and bring several new features and enhancements to the embedded product line.
4 simple options to adapt your device to a networked device:
Serial Tunnelling (Point to Point)
The UDS-10 encapsulates serial data into packets and transports it over Ethernet. Using two UDS's connected by a network, virtual serial connections can be extended across a facility or around the world.
Virtual Com Ports (VCP's)
The included Redirector software simplifies your integration process by extending the functionality of your COM port-based Windows® applications. With virtual COM ports mapped to remote Device Servers on the network, you can replace direct serial connections. No changes required to your existing software.
Modem Emulation
In modem emulation mode, the UDS-10 is used to replace dial-up modems. The unit accepts basic modem AT commands on the serial port, then establishes a TCP/IP connection to the end device utilising gateways and bandwidth to eliminate dedicated modems and phone lines.
Direct TCP/IP connection
If VCP's are not feasible then you can integrate connections to the UDS via a 'Direct Socket' (also known as Winsock). This is particularly suitable for large software applicatiosn running many hundreds of device servers.
The UDS-10 even includes a built-in Web server, which can be used for configuration, or to display operating and troubleshooting information on the attached links to online support.
Utilities
The provided Windows-based configuration software (Device Installer) simplifies installation and setup. The UDS-10 can also be set up locally through its serial port, or remotely over a network using Telnet or a Web browser.
| Specifications |
 |
Applications |
- SERIAL TO ETHERNET CONVERSION
- FLEXIBLE AND WELL-DEVELOPED IP PROTOCOL STACK
- SUPPORT FOR RS-232 OR RS-485 SERIAL CONNECTIONS
- 10Mbit/sec RJ45 ETHERNET (UDS10B)
- 100Mbit/sec RJ45 ETHERNET (UDS100B)
- 128bit AES ENCRYPTION OPTION AVAILABLE
- CONFIGURABLE VIA INTERNET WEB SERVER, SNMP, DHCP, SERIAL PORT OR TELNET
- FLASH ROM FOR EASY SOFTWARE UPGRADES
- POWER THROUGH SERIAL OR BARREL CONNECTOR
|
|
- SECURITY SYSTEMS
- ACCESS CONTROL PANELS
- FIRE ALARM SYSTEMS
- TIME/ATTENDANCE CLOCKS
- BIOMETRICS
- MEDICAL EQUIPMENT
- MOTION CONTROLLERS
- TEST AND MEASUREMENT
- ASSEMBLY LINE CONTROL
- RFID AND INVENTORY CONTROL
- POS SYSTEMS
|
| Resources and Documentation |
|
UDS-10B Datasheet
Technical documentation for designers, includes pin-outs & dimensions.
Hosted by Lantronix
|
 |
Revision: 910-350
Apr 2005
2 pages - 583Kb
|
|
UDS-10B and UDS100B User Guide
Lantronix user manual for Installation and configuration of UDS-10B and UDS100B device servers.
|
|
Revision: 900-360
Jun 2004
78 pages - 705.9 KB
|
|
UDSxx Firmware
Latest ROM file, release notes & WebConfig COB file for UDS10 & UDS100 products. Use TFTP or Installer to download this code to the device server.
|
 |
Revision: v5.2
Jan 2004
99.6 KB
|
|
Lantronix Device Installer Utility
Invaluable tool for detecting and configuring Lantronix device servers. A must for all WiPort/Xport/UDS customers. You will probably need the .NET patch too but WARNING - this will be a large file
Hosted by Lantronix
|
 |
Web Page
Revision: v4.1.0.9
|
|
Lantronix Redirector Utility
Utility to provide Virtual Com Ports on a Windows based platform which map across to Lantronix device servers. A good alternative to having to create direct TCP/IP sockets to Xport/Wiport/UDS devices. Free to use.
|
|
Revision: V3.0.0.2
Jun 2004
2.7 MB
|
|
Lantronix Redirector User Guide
User Guide for setting up and using the Lantronix Redirector utility which creates Virtual Com Ports to Lantronix device servers.
|
|
Revision: 900-324A
Nov 2003
31 pages - 339.8 KB
|
|
|
|
| Ideas and Help |
|
Have you considered NetPort?
For certain specific applications where custom features are required such as RS232 only, smaller size or weight, power-sharing the PSU, bespoke cable adaptors and specialized firmware or re-branding we can offer the NetPort device server.
Based on the Xport device server it behaves almost identically to the UDS family, with the same config menu's, tools and utilities so you can migrate your accumulated knowledge straight over to NetPort with confidence.For more info click here...
Can't quite find what you are looking for?
Why not contact the Alpha Micro team for your area (contact us) or visit the product page at www.lantronix.com
|
